Skip to content
Top Notch Home Inspections

What can thermal imaging find that a regular inspection can't?

A home inspection is visual: we report what can be seen. A thermal camera shows surface temperature differences that can reveal hidden moisture, leaks and hot electrical connections. We primarily use it for moisture detection, and most of our clients add it.

Serving Kona, Hilo and the whole island.

Top Notch inspector scanning a living room with a thermal imaging camera

This short video briefly goes over thermal imaging technology and why it's valuable. We highly recommend adding thermal imaging to every inspection.

Thermal Imaging

Myths, busted

  • It does NOT see through walls; it reads surface temperatures.
  • A cold spot isn't automatically water; our inspectors confirm with tools like a moisture meter.
  • Training matters: a phone clip-on camera isn't professional equipment, and false positives are as damaging as misses.
Three thermal imaging examples: a plumbing line showing a blockage at the connector, moisture coming in from the foundation and going beneath the carpet, and an electrical circuit breaker showing signs of overheating.

What it can help find

  • Water intrusion through siding, stucco or block
  • Leaks around windows and doors
  • Plumbing leaks, including shower pans, toilets and pipe condensation
  • Roof, skylight and vent leaks
  • Missing or settled insulation
  • HVAC duct leaks and condensation
  • Overheating breakers and loose connections

Visible

Exterior wall and gutter of a house where water got behind the siding

Infrared

Infrared image of the same wall, with a purple area showing water behind the siding
This house had problems with the installation of the siding which has lead to water (purple area in the center of picture, bottom) infiltration behind the siding. The gutter/sidewall area was not equipped with kick-out flashing, so the gutter over-splash had entered behind the siding.

Thermal imaging is very good at finding these kind of problems, but it should only be done by someone trained to read it. All our inspectors have completed thermal imaging certification training.

Visible

Interior wall and ceiling of a house with water intrusion that isn't visible

Infrared

Infrared image of the same interior wall showing the cooler pattern of water intrusion
Here we see another example of water intrusion, this time from badly installed siding and flashing on the house's exterior, but seen from the inside of the house using thermal imaging during a home inspection. Water intrusion is not always easy to diagnose, especially because a home inspection is supposed to be non-invasive. Because water travels in so may ways (dripping, wicking, running, evaporation, condensation, etc) it is not easy to find the source.

Ready to book your inspection?

Send a booking request online in a few minutes, or call and talk to a real person. Same-day reports, every time.

Book Call Text